Restoration Equipment Management
The Restoration Equipment Audit: Finding Lost and Idle Gear
In brief
Dehumidifiers left on finished jobs, air movers buried in a storage unit, and gear nobody can account for quietly drain a restoration company. Here is how to run a full equipment audit, find what is lost or idle, and keep it from happening again.
Ask most restoration owners how many air movers they own and you will get a confident number. Ask how many are in the warehouse, how many are on active jobs, and how many are sitting in a basement where drying finished two weeks ago, and the confidence fades.
Drying equipment is one of the largest investments a mitigation company makes, and it walks off in small, quiet ways. A dehumidifier stays on a job after the last reading because nobody scheduled the pickup. A set of air movers goes to a sister job and never gets moved on paper. An air scrubber with a bad motor sits in the back of the shop for months, still counted as available.
An equipment audit is how you find out what you actually have, where it is, and whether it is earning its keep. It is not glamorous work. Done once properly and then kept up with a light routine, it pays back in fewer emergency rentals, fewer arguments about what was on site, and better decisions about what to buy next.
What "lost" and "idle" really mean
Before counting anything, agree on the categories. Every piece of equipment should land in exactly one bucket at the end of the audit.
- Available: In the warehouse or a truck, working, clean, ready to deploy.
- Deployed and running: On an active job with drying still in progress.
- Deployed but finished: On a job where drying goals have been met but the gear has not been picked up. This is the most common leak.
- Out for repair: At a repair shop or waiting on parts, with a date it went out.
- Broken in the shop: Not working, not sent anywhere. Often invisible.
- Lent or transferred: At another branch, with a partner company, or loaned to a sub.
- Unaccounted for: Not found anywhere. These are your losses.
The audit's real goal is to shrink the last four buckets and move gear into the first two.
Build the master list before you count
You cannot audit against nothing. Start with a master list of every piece of equipment the company owns, built from purchase records, prior inventory sheets, insurance schedules and the accountant's fixed asset list.
For each unit, capture:
| Field | Why it matters |
|---|---|
| Unique ID | A number on a durable label, painted or engraved, not just a sticker |
| Type and model | So you can compare like with like |
| Serial number | For warranty, theft reports and repair history |
| Purchase date | Age drives repair-or-replace decisions |
| Home location | Which warehouse or branch it belongs to |
| Current status | One of the buckets above |
| Current job or location | Where it is right now |
| Last service date | Filters, cleaning, repairs |
If units do not have unique IDs today, the first audit is when you add them. Labeling everything is tedious, but every later step depends on it.
Run the count: warehouse, trucks, jobs
Pick a count day and freeze movement
A clean audit needs a snapshot. Choose a slower day, ideally not in the middle of a storm response, and plan to count everything within a single day or two.
The day before:
- Tell crews which jobs will have equipment checked and that a count is happening.
- Pull a list of every active job with equipment on site, from your job records and schedule.
- Ask PMs to note any jobs where drying is complete but gear has not been picked up.
- Clear a staging area in the warehouse so counted gear can be separated from uncounted gear.
On count day, hold new deployments to what is truly necessary, and log any that happen with the time and unit IDs so they do not get counted twice.
On count day itself, split the work into three sweeps.
Warehouse and shop
Count every unit by ID. Move each counted unit to the staging area. Anything that does not power on or has visible damage goes into a separate broken pile with a tag noting the problem. Check corners, mezzanines, storage units and the back of the shop; this is where forgotten gear lives.
Trucks and trailers
Gear riding around in trucks is easy to forget. Have each crew lead empty their truck long enough to read every ID, or count it at the start of the shift.
Active jobs
Send someone, often a PM or a tech already scheduled at the site, to record every unit ID on site with a photo of each unit in place. Take a photo of the label and a wider shot showing the room. This also gives you a clean record if a customer later asks what was in their home.
At the end, compare the count to the master list. Every unit should match exactly one location.
Reconcile and chase the gaps
The reconciliation is where the real findings show up. Work through the differences in this order.
- Units counted but not on the master list. Add them. These are often purchases nobody recorded, or rentals that never went back. Rentals need to be returned or bought out on purpose.
- Units on jobs where drying is complete. Schedule pickups this week. Each one is gear you might be renting elsewhere.
- Broken units with no repair plan. Decide repair, scrap or sell for parts. A broken unit counted as available is worse than no unit at all, because someone will load it on a truck.
- Units out for repair with no return date. Call the repair shop. Repairs have a way of stalling quietly.
- Units lent or at another branch. Confirm in writing and record them properly.
- Unaccounted units. Check job history to find the last job each unit was on. Call those customers or property managers if needed. Look through job photos from those jobs; equipment often shows up in the background of the last visit.
Whatever is still missing after a reasonable search is a loss. Record it, talk to your accountant about how to handle it on the books, and file a police report or insurance claim if theft is suspected.
A hypothetical walk-through: auditing a mid-size fleet
Picture a shop with a master list of about eighty air movers, twenty dehumidifiers and eight air scrubbers. The owner suspects things are off because the company rented dehumidifiers twice in the last month.
The count finds this: fifty-five air movers in the warehouse or trucks, fourteen on active jobs, and six on two jobs where the PM confirms drying finished more than a week ago. That leaves five air movers unaccounted for. Of the twenty dehumidifiers, eleven are available, five are deployed, two are on the finished jobs, one is in a corner of the shop with a dead compressor, and one is missing. All eight air scrubbers are found, but two have filters that have not been changed since they came back from a mold job.
Reconciliation takes three days. Pickups on the two finished jobs return six air movers and two dehumidifiers to service. The dead dehumidifier goes to repair with a return date. Job photos show two of the missing air movers in the background of a commercial job that closed last month; the property manager finds them in a mechanical room. Three air movers and one dehumidifier are written off.
In the end, the shop had more than enough dehumidifiers to avoid both rentals. The problem was never the fleet size. It was gear sitting on finished jobs and in a shop corner.
Measure utilization, not just location
Once you know where everything is, the next question is whether it earns its keep. Utilization is simple: out of the days in a period, how many days was a unit deployed on a job?
You do not need exact figures to see patterns. Compare by type and by age:
- Units that are almost never deployed may be too many for your volume, the wrong type for your typical loss, or simply unreliable so techs avoid them.
- Units that are always deployed tell you where you are short and where emergency rentals come from.
- Older units with frequent repairs are candidates for replacement before the next storm season, not during it.
Also look at how long units stay on a job after drying goals are met. If gear routinely sits for days after the last reading, the fix is a scheduling habit, not more equipment.
Keep it from drifting again
A single audit decays within weeks if nothing changes. A light routine keeps the numbers honest.
- Log every move. Each time a unit goes to or comes from a job, record the ID, job and date. The moment this becomes optional, the list starts drifting.
- Make pickup part of the drying plan. When drying goals are met, the pickup is scheduled the same day, not "when someone is in the area."
- Photograph equipment on every set and every pickup. Photos with visible IDs settle most disputes.
- Tag broken gear immediately. A bright tag and a dedicated shelf for anything not working, with a weekly review.
- Cycle count monthly. Count one category each month instead of everything at once.
- Full audit before storm season. Know exactly what you can deploy before the phones light up.
Common audit mistakes
A few habits undermine an otherwise solid count.
- Counting by type instead of by ID. "We have sixty air movers here" tells you nothing about which ones are missing. Always record the unit ID.
- Trusting the job record without visiting. The schedule may say equipment was picked up when it was not. Physically confirm what is on each active job.
- Skipping the broken pile. Units that do not work need a status and a decision, not a corner.
- Ignoring rentals. Rented units mixed into your fleet inflate your count and run up charges. Separate and label them on arrival.
- Doing it once and stopping. A single audit without a routine afterward just tells you how bad things were on one day.
- Leaving crews out of the why. Techs who understand that missing gear means emergency rentals and late starts are much more careful about logging moves.
Where RestoreUnited fits
RestoreUnited's Equipment Inventory module is coming soon. Today, shops use Job Management and Scheduling & Dispatch to keep active jobs and pickups visible, Photos & Journals to keep set and pickup photos tied to each job, and Custom Reporting to review open jobs that may still have gear on site. The audit method above works with any system, including a spreadsheet, as long as every move gets logged.
What to do this week
- Pull together a master list from purchase records and your last inventory, even if it is rough.
- Ask each PM to name every job where drying is complete but equipment is still on site, and schedule those pickups.
- Walk the warehouse and tag every broken unit with its problem and a decision date.
- Pick a count day within the next two weeks and tell the crews.
- Order durable labels so every unit has a unique ID before the count.
- Decide who owns the equipment list going forward and how moves will be logged.
See it in RestoreUnited: Job Management
RestoreUnited product videoFrequently asked questions
How often should a restoration company audit its equipment?
Plan one full audit a year, ideally before your busiest season, and a smaller cycle count each month that covers one equipment type at a time. Shops with multiple branches or heavy storm work may want a full count twice a year.
What is the most common reason restoration equipment goes missing?
In most shops it is not theft. It is gear left on jobs after drying goals are met, units moved between jobs without being recorded, and broken units sitting in the shop while still counted as available. A consistent move log and same-day pickup scheduling fix most of it.
Should we use barcodes or just numbered labels?
Either works if every unit has a unique ID and every move gets recorded. Barcodes speed up scanning on large fleets, but a clear, durable numbered label used consistently beats a barcode system that crews skip.