Answer Hub · Restoration Equipment Management

How do restoration companies manage consumable supplies and truck stock?

The short answer

Set a standard stock list for each truck type with minimum quantities, restock on a fixed schedule from a single shop location, record what each job uses, and assign one person to own the shop supply room. A weekly truck check and a simple reorder trigger keep crews from running out mid-job and keep supply costs tied to the jobs that used them.

Why truck stock causes so many small problems

Consumables are cheap one at a time and expensive in aggregate. Plastic sheeting, tape, antimicrobial, bags, filters, zipper doors, corner guards, gloves, respirator cartridges, fasteners and cleaning supplies disappear quickly. When trucks are stocked differently, crews borrow from each other, make extra runs to the store, and show up at a job without what they need.

Untracked supplies also hide job costs. If nobody records what a job used, those materials end up as shop overhead, and you cannot tell whether a job type is profitable.

Step one: a standard stock list

Start by defining what each truck should carry. Most shops have two or three truck types, such as a water mitigation truck, a mold truck and a general service truck.

For each type, list items and minimum quantities. Keep it to what crews genuinely use on a typical job. Here is an illustrative partial list for a mitigation truck:

ItemMinimum on truckNotes
Plastic sheeting rolls2Two thicknesses if you use both
Tape6 rollsMix of types
Zipper doors2
Contractor bags1 box
Antimicrobial2 containersPer your product and labeling
Disposable gloves2 boxesTwo sizes
Respirator cartridges1 set per techMatched to the masks your crews use
Floor protection1 roll

Post the list inside each truck and keep a master copy at the shop.

Step two: one owner for the supply room

Assign one person, often a warehouse lead or operations coordinator, to own the shop supply room. Their job is to keep shop stock above minimums, place orders, and run the truck checks. Without an owner, everyone assumes someone else is reordering.

Step three: a fixed restock routine

  • End of day: the crew restocks anything they used heavily that day from the shop, if the shop is open.
  • Weekly truck check: the supply owner checks each truck against the stock list, restocks to minimums and notes any shortages.
  • Reorder trigger: each shop item has a reorder point. When shop stock drops to that level, it goes on the order list.
  • Storm prep: before forecast storm events, raise truck and shop minimums for the items you burn fastest.

Step four: record usage by job

Recording every glove is not realistic. Recording meaningful materials is. Ask crews to note supplies used on the job in the daily journal or work order when they exceed a normal amount, or for any item you bill or track separately. For example: "Used 3 rolls of sheeting and 2 zipper doors for containment."

Over time, this tells you what each job type actually consumes, which helps with budgeting and stock levels.

A hypothetical example

Picture a shop with four trucks and no standard list. Two crews run out of sheeting on the same storm day and each makes a store run, losing over an hour apiece. Another truck carries six boxes of gloves nobody needs.

After setting a stock list, a weekly check and a reorder trigger, the supply owner notices on Monday that shop sheeting is at its reorder point and orders before a forecast storm. Crews start the week fully stocked, and the store runs mostly stop. Job journals show how much containment material each mold job used, which the PM uses to budget the next similar job.

Review the list every season

A stock list written once and never revisited drifts out of date. Every few months, the supply owner and one crew lead from each truck type should sit down for twenty minutes and ask:

  • Which items did crews run out of most often?
  • Which items sat on trucks untouched for months?
  • Did we add a new service, product or job type that needs different supplies?
  • Are minimums right for the season ahead, such as freeze season or hurricane season in your area?

Adjust the list, update the copy posted in each truck, and tell crews what changed. Keeping the list honest is what stops trucks from slowly filling with items nobody uses while the things crews need keep running short.

Common mistakes

  • No standard list. Every truck becomes a different experiment.
  • No owner. Supplies run out because ordering is everyone's job.
  • Overstocking trucks. Crowded trucks hide what is there and lose things.
  • Ignoring expiration and storage. Some products have shelf lives or storage needs. Follow product labels.
  • Skipping usage notes. Untracked supplies make job costs look better than they are.
  • No storm buffer. Busy weeks consume stock faster than normal reorders can replace it.

Using software to support it

Truck stock does not need a complex system to start. A posted list, an owner and a weekly check do most of the work. Recording meaningful supplies in Work Orders and Photos & Journals on the job keeps usage tied to the work, and Job Budgeting in RestoreUnited lets you compare those costs against your plan. RestoreUnited's Equipment Inventory module is coming soon for tracking equipment more formally.

See it in RestoreUnited: Job Budgeting

RestoreUnited product video

Frequently asked questions

How often should restoration trucks be restocked?

A full check against the stock list once a week works for many shops, with crews topping up heavily used items at the end of each day. During storm surges, check more often and raise minimums for items you use fastest.

Should crews record every supply they use?

No. Focus on meaningful materials, items you bill or track, and anything used beyond a normal amount. Noting these in the job journal or work order keeps job costs realistic without slowing crews down.

Who should own truck stock?

Assign one person to own the shop supply room and the weekly truck checks. Crews still restock what they use, but a single owner makes sure orders are placed and minimums are kept.

See RestoreUnited run a restoration company

Book a live walkthrough with our team, or choose a plan and get started.