Free tools for restoration companies
Run your own numbers. Every calculator shows its formula and assumptions, uses only what you enter, and works without giving us your email.
Job profit calculator
Revenue, labor, materials, subcontractors, equipment and overhead to gross and net margin.
Admin time & ROI calculator
What repetitive admin work costs you today, and what your own estimate of savings would be worth.
Crew capacity calculator
How many job-days your crews can take on, and how close to capacity you are.
Business assessment
Ten questions, an instant practical improvement report.
Why run your own numbers
Most restoration owners know roughly how busy they are and roughly how the bank balance looks. Fewer know which job types actually make money, what the office's repetitive admin time costs each week, or how many jobs the crews can really carry in a storm week. Those answers are hiding in numbers you already have: timesheets, invoices, material receipts and the schedule.
These tools are simple calculators and a short assessment, not accounting software. Put in your own figures, look at what comes back, and use it to decide what to look at next. Nothing you enter is a substitute for your financial statements or a conversation with your accountant, but a few minutes with real numbers usually beats a year of guessing.
Job profit calculatorHow much a single job actually earned after its direct costs, and what share of the job's revenue that gross profit represents. Use it on a finished job, or on a running job using costs to date.
How to use it
- Pick one recent job you know well, ideally a typical one rather than your biggest or worst.
- Enter the job's revenue: what was invoiced, or what you expect to collect after any approved supplements.
- Enter labor as total hours on the job multiplied by your loaded labor rate, not just the wage.
- Add materials and consumables, subcontractor costs and the equipment cost you assign to the job.
- Add any overhead allocation if you use one, so you can see the difference between gross and net views.
- Review the gross profit and margin, then repeat with two or three other jobs of different types.
Reading the results
Gross profit is what the job left to cover overhead and profit; margin lets you compare jobs of different sizes fairly. If similar jobs come out very differently, look at labor hours and unrecorded change orders first, since those are the usual causes. If margins look healthier than your bank account feels, check whether all costs are really being recorded against jobs. Consistent tracking of the same inputs on every job is what makes this worth doing.
Common mistakes
- Using the hourly wage instead of the loaded labor rate, which makes labor look cheaper than it is.
- Leaving out consumables, travel time or subcontractor invoices that arrived after the job closed.
- Judging the business on one unusual job instead of comparing several jobs of the same type.
Admin time & ROI calculatorHow many hours your team spends on repetitive admin work, such as retyping job details, chasing signatures, hunting for photos and building reports, and what that time is worth at your loaded hourly cost.
How to use it
- For each listed task (reports and job status, scheduling and dispatch calls, chasing paperwork and signatures, re-entering data, building invoices and timesheets) estimate the hours per week your team spends.
- Ask the people who do the work, or time it for a week, rather than guessing from the owner's chair.
- Enter the loaded cost of an admin hour, not just the wage.
- Enter your own estimate of how much of that time a better process or system could remove; be conservative.
- Optionally enter what you spend each month on the separate tools a single system would replace.
- Review the hours and cost the calculator shows, and decide which task to fix first.
Reading the results
The result is an estimate of time value, not money that will appear in the bank. Freed hours only become value if they go to something useful, such as faster invoicing, more follow-ups or taking on more jobs without hiring. Use conservative estimates, and focus first on the one or two tasks that take the most hours. Compare the result against the full cost and effort of any change you are considering, including training time.
Common mistakes
- Guessing hours from memory instead of asking the people who do the work or timing it.
- Assuming every admin hour can be eliminated, rather than the portion a change can realistically remove.
- Counting saved time as cash savings without a plan for what those hours will be used for.
Crew capacity calculatorHow many job visits your crews can cover in a week once travel time and an emergency buffer are counted, and whether the visits you need this week fit, which is the question that matters most before a storm surge.
How to use it
- Enter the number of crews you can reliably field, not counting people you hope to hire.
- Enter working days per week and the hours each crew works per day.
- Enter average travel time per job visit and average on-site hours per visit, from recent schedules rather than best cases.
- Enter the job visits you need to cover this week, counting monitoring visits as well as new work.
- Set an emergency buffer to keep some capacity free for new losses that will call in mid-week.
- Compare visits needed with visits available, then decide on overtime, subcontractor help or which work to move before the week starts.
Reading the results
If normal demand already sits near capacity, a surge will mean turning work away or stretching crews too thin. A gap tells you roughly how many extra crew-days you would need, which helps you line up subcontractors and equipment early. Revisit the numbers after each busy period using what actually happened. Remember that monitoring visits on drying jobs consume capacity every day the job is open.
Common mistakes
- Planning with scheduled hours instead of the productive hours crews actually spend on job work.
- Forgetting daily monitoring visits and other repeat trips that tie up crews on open jobs.
- Assuming subcontractors will be available during a regional storm, when every company is calling them.
Business assessmentHow your company handles ten everyday operating questions: how many separate apps you juggle, how fast you can see job status, whether crews see schedules on their phones, where photos live, how signatures and crew time are captured, when you find out a job lost money, how you catch unbilled work, how job information reaches accounting, and how customers get updates.
How to use it
- Set aside a few uninterrupted minutes and answer for how the business works today, not how you want it to work.
- Answer all ten questions; if you are unsure, pick the answer that matches what usually happens.
- Ask a project manager or office lead to take it separately, then compare answers.
- Read the improvement report and note the areas it flags first.
- Choose one concrete change for each of those areas and set a date to revisit.
Reading the results
The report reflects your own answers, so it is a starting point for a conversation, not a grade. Areas with low scores usually point to process gaps, such as inconsistent documentation or slow invoicing, that cost time and cash. Pick the one or two changes that would make the biggest practical difference and work on those before anything else. Retake the assessment after a few months to see whether the changes stuck.
Common mistakes
- Answering for the strongest week of the year instead of a typical week.
- Trying to fix all ten areas at once instead of the two that matter most.
- Taking the assessment alone when the people closest to the work see things differently.
Questions about the tools
Do I need exact numbers to use these tools?
No. Reasonable estimates are enough to get a useful answer, and you can refine them as you go. The more the numbers come from real timesheets, invoices and schedules, the more you can trust the result.
Is the information I enter saved or shared?
The calculators run in your browser, and nothing you type is sent anywhere unless you choose to save your results. If you do save them, you give us your email address and we keep your inputs and results with it so the team can follow up with you. If you would rather not, just use the results on screen.
What is a loaded hourly rate and where do I get it?
It is the full cost of an hour of an employee's time, including wages plus employer taxes, insurance, benefits and paid time off. Your bookkeeper or accountant can help you calculate it from your wage and benefit records. Using it instead of the wage gives a truer picture of labor cost.
Can these tools replace my accountant or financial statements?
No. They are for quick operational decisions, such as which jobs to look at more closely or whether you can take on more work. Your financial statements and your accountant remain the authority on your actual profit, taxes and cash position.
How often should I run these numbers?
A good rhythm is the profit calculator on a few finished jobs each month, the capacity calculator before each busy season, and the assessment every few months. The value comes from comparing your own results over time.
See RestoreUnited run a restoration company
Book a live walkthrough with our team, or choose a plan and get started.