Restoration business and software glossary

90 plain-language definitions of the terms that come up when running a restoration company, working with carriers and choosing software, with a note on why each one matters to the business.

Job types and phases

The kinds of work a restoration company sells and the stages a job moves through from first call to final walkthrough.

Affected area
The part of a property that has been damaged by water, fire, smoke, mold or storm and needs work. Defining it clearly, with photos and readings at the edges, sets the boundary for the scope of work. A vague affected area is one of the most common causes of disputes about what was and was not included. Related: Scope of work, Moisture map, Containment
Board-up
Securing an opening in a damaged building, such as a broken window, door or wall, usually with plywood, so the property is protected from weather, entry and further loss. Board-ups are often the first billable task on a fire or storm job. Photograph before and after and record materials and hours, because emergency work done at night is easy to under-document. Related: Emergency services, Tarp-off, Storm response
Contents pack-out
Inventorying, packing and removing a customer's belongings from a damaged property so they can be cleaned, stored or protected while the structure is repaired. A pack-out involves many small items, so a careful room-by-room record and photo trail matter. Clear records protect the customer, the company and the claim when items come back. Related: Affected area, Policyholder, Photo stream
Emergency services
The immediate work done to stop damage from getting worse, such as water extraction, board-up, tarp-off and setting drying equipment. This is usually the first phase of a job and often happens after hours. Fast, well-documented emergency work tends to set the tone for the whole claim and the customer relationship. Related: Mitigation, Board-up, After-hours call
Fire and smoke restoration
Cleaning, deodorizing and repairing a property after a fire, including soot removal, odor control, contents cleaning and rebuilding damaged materials. Fire jobs often combine several job types at once, since firefighting also leaves water damage. They tend to run long, so job costing and change tracking matter more than on a quick water job. Related: Mitigation, Reconstruction, Contents pack-out
Large loss
A job that is much bigger than a company's typical work, such as a commercial building, multi-unit property or major disaster site. What counts as large depends on the size of the company. Large losses stretch crews, equipment and cash flow, so many companies set a decision rule ahead of time for when to take one on and how to staff it. Related: Storm response, Subcontractor, Retainage
Mitigation
The work done to stop a loss from spreading and prevent further damage, such as extracting water, removing wet materials, drying the structure and controlling odor or mold growth. It is distinct from reconstruction, which puts the property back together. Many companies track mitigation and reconstruction as separate phases or jobs because they are often billed and managed differently. Related: Reconstruction, Structural drying, Emergency services
Mold remediation
Removing mold growth and the materials it has damaged, and correcting the moisture problem that caused it, usually behind containment to keep spores from spreading. Remediation jobs depend on clear scoping and careful documentation. When health concerns or testing questions come up, involve an industrial hygienist rather than giving the customer an opinion. Related: Containment, Air scrubber, Negative air
Program work
Jobs that come through an agreement with an insurance carrier or third-party administrator, where the company agrees to follow the program's pricing, response and documentation rules in exchange for referrals. Program work can provide steady volume. It also adds reporting requirements and review steps, so it is worth tracking how program jobs actually perform on margin and cash flow. Related: TPA, Carrier, Referral source
Reconstruction
The phase of a job that rebuilds and repairs the property after mitigation, such as drywall, flooring, cabinets, paint and trim. It looks more like general contracting, with longer timelines and more subcontractors. Keeping reconstruction tied to the original job record helps the team see the full history and the full profit picture. Related: Mitigation, Subcontractor, Change order
Storm response
Handling a surge of jobs after a regional weather event such as a hurricane, hailstorm, flood or freeze. Storm weeks bring more calls than normal capacity, so companies need a plan for triage, crews, equipment and communication before the storm arrives. A storm that is not documented well can turn into months of slow collections. Related: Large loss, On-call rotation, Crew capacity
Tarp-off
Covering a damaged roof or opening with tarps to keep rain and weather out until permanent repairs can be made. It is a common emergency service after storms and fires. Record the size of the area, materials and labor, and take photos from the ground and roof where it is safe to do so. Related: Board-up, Emergency services, Storm response
Water categories
A way of describing how contaminated the water involved in a loss is, ranging from clean water to grossly contaminated water such as sewage or floodwater. The category affects what materials can be saved, what protective gear crews need and how the job is scoped. Follow the current industry standard for the work, and record the category and its reasoning in the job file. Related: Water classes, Mitigation, Scope of work
Water classes
A way of describing how much water is present and how hard the affected materials will be to dry, based on how much area and which kinds of materials got wet. The class helps guide how much drying equipment a job needs. Recording the class at the start makes later equipment counts easier to explain to an adjuster. Related: Water categories, Structural drying, Equipment placement

Field work and documentation

What happens on site and how it gets recorded so the office, the customer and the carrier can see what was done.

Containment
A temporary barrier, usually plastic sheeting with zip doors, that separates a work area from the rest of a building to keep dust, spores or odor from spreading. Containment is common on mold, fire and demolition work. Photograph it once it is set up and record when it comes down, because it is often a line item that needs proof. Related: Mold remediation, Negative air, Air scrubber
Dry standard
A moisture reading taken from an unaffected material of the same type in the same building, used as a comparison for what dry looks like there. Different materials and buildings read differently, so a local reference is more useful than a general number. Take it on day one, before equipment changes the conditions. Related: Drying goal, Moisture meter, Drying log
Drying goal
The moisture level a material needs to reach before drying is considered complete, usually set by comparing to a dry standard. Writing down the goal at the start gives the crew a clear target and gives the adjuster a clear reason for when equipment came off. Without one, drying tends to end on a guess. Related: Dry standard, Drying log, Moisture meter
Drying log
The running record of moisture readings, atmospheric readings and equipment on a drying job, usually taken on each monitoring visit. It shows that the structure was drying, how fast and when it reached the goal. A complete drying log is often the main support for equipment days and the length of the job. Related: Psychrometric readings, Moisture map, Equipment day
Equipment placement
Where and how drying equipment such as air movers and dehumidifiers is set on a job, based on the size of the area, the materials and the amount of water. Good placement dries the structure faster and supports the equipment count on the invoice. A quick photo or sketch of placement on day one helps anyone who visits later. Related: Air mover, Dehumidifier, Water classes
Job journal
A dated running record of what happened on a job: visits, conversations, decisions, delays, customer requests and anything unusual. It is the place a project manager or office person looks to answer what happened and when. Short, factual entries made the same day are far more useful than a long note written from memory a week later. Related: Photo stream, Drying log, Change order
Moisture map
A drawing or floor plan that marks where moisture readings were taken and what they showed, often updated on each visit. It shows the shape of the wet area and how it shrinks as drying works. It also makes the affected area easy to explain to customers and adjusters. Related: Affected area, Moisture meter, Drying log
Photo stream
The full set of photos for a job in time order, from first arrival through completion. A good photo stream tells the story without extra explanation: overview shots, close-ups, readings on meter screens, equipment placement and finished work. Agreeing on what every job must have photos of makes documentation consistent across crews. Related: Job journal, Contents pack-out, Certificate of completion
Psychrometric readings
Measurements of the air on a job, such as temperature and relative humidity, used to understand how much moisture the air is holding and whether drying conditions are working. Crews typically take readings inside the affected area, in unaffected areas, outside, and at dehumidifier exhaust. Consistent readings at each visit make the drying log meaningful. Related: Drying log, Hygrometer, Dehumidifier
Source of loss
What caused the damage, such as a supply line break, roof leak, appliance failure, backed-up drain or storm. Identifying and documenting it early matters to the customer, the scope and the claim. Photograph the source and note whether it has been repaired or still needs a plumber or roofer. Related: Water categories, Adjuster, Job journal
Structural drying
Drying the building itself, including framing, subfloor, drywall and other materials, using air movement, dehumidification and sometimes heat, rather than simply tearing everything out. It is the core of most water mitigation jobs. Done well and documented daily, it can save materials and shorten the job. Related: Mitigation, Drying log, Dehumidifier

Scheduling and crews

The people who do the work and how a company decides who goes where and when.

After-hours call
A request for service that comes in nights, weekends or holidays, often for an active water leak or fire. These calls are a large part of restoration work, so the company needs a clear process for who answers, what information is collected and who gets dispatched. Capturing the details right away prevents a lost job or a confused crew. Related: On-call rotation, Dispatch, Emergency services
Crew capacity
How much work a company's crews can take on in a given period, usually measured in crew-hours or job-days. Knowing capacity helps decide when to accept new jobs, when to bring in subcontractors and how to plan for storm weeks. Capacity planning works well when it is based on how long jobs actually take, not how long they are supposed to take. Related: Job-day, Utilization, Storm response
Crew lead
The field technician in charge of a crew on site, responsible for the work quality, the daily readings, the photos and keeping the office informed. Crew leads are often the deciding factor in whether documentation gets done. Many companies train crew leads first when rolling out new processes or software. Related: Field technician, Project manager, Job journal
Dispatch
Assigning a crew or technician to a job and sending them the details they need, such as address, contact, job type and instructions. Good dispatch balances urgency, travel and skills. A shared schedule that everyone can see cuts down on phone calls and missed handoffs. Related: Schedule board, On-call rotation, Crew lead
Estimator
The person who inspects a loss, measures it and writes the estimate or scope of work. In smaller companies the owner or project manager often does this. Getting field notes, photos and measurements to the estimator quickly speeds up the estimate and reduces return trips. Related: Estimate, Scope of work, Project manager
Field technician
A crew member who does hands-on work such as extraction, demolition, equipment setup, monitoring and cleaning. Technicians collect much of the job's documentation, so they need simple, clear expectations for photos, readings and notes. Their recorded time is also the base of job costing. Related: Crew lead, Time tracking, Loaded labor rate
Job-day
One crew working one job for one day, used as a simple unit for planning capacity. Thinking in job-days makes it easier to see whether the schedule is overbooked. Track how many job-days each type of job actually takes so the planning numbers stay honest. Related: Crew capacity, Utilization, Schedule board
On-call rotation
The schedule of who answers after-hours calls and who is available to respond on a given night or weekend. A fair, published rotation reduces burnout and missed calls. Make sure the on-call person can see job details and the schedule from a phone. Related: After-hours call, Dispatch, Mobile app
Project manager
The person responsible for a job from start to finish: coordinating crews and subcontractors, communicating with the customer and adjuster, tracking changes and keeping the job on budget. On reconstruction work this role is close to a general contractor's superintendent. Project managers need one place to see the job's status, documents and costs. Related: Crew lead, Estimator, Change order
Schedule board
The shared view of which crews and people are assigned to which jobs on which days. It can be a whiteboard, a spreadsheet or scheduling software. Whatever the tool, the board only helps if it is kept current and everyone trusts it. Related: Dispatch, Job-day, Crew capacity
Subcontractor
An outside company or tradesperson hired to do part of a job, such as plumbing, electrical, roofing, flooring or specialty cleaning. Subcontractors extend capacity, especially on reconstruction and storm work. Track their costs, schedules and paperwork against the job so they show up in job costing. Related: Reconstruction, Job costing, Crew capacity
Utilization
How much of a technician's or crew's paid time is spent on billable job work compared with travel, shop time and waiting. It is a practical way to see whether the schedule is using people well. Low utilization often points to dispatch, travel or paperwork problems rather than lazy crews. Related: Revenue per technician, Crew capacity, Time tracking

Customers, carriers and paperwork

The people involved in a claim and the documents that move a job from authorization to payment.

Adjuster
The person who evaluates an insurance claim on behalf of the carrier, including reviewing the damage, the scope and the estimate. Some adjusters work directly for the carrier and some are independent. Clear, organized documentation and prompt, factual communication make the adjuster's review easier for everyone. Related: Carrier, Supplement, Policyholder
Carrier
The insurance company that issued the property policy and is handling the claim. Each carrier may have its own documentation preferences and review steps. Recording the carrier and claim number on every insurance job keeps follow-ups and billing organized. Related: Adjuster, Claim number, Program work
Certificate of completion
A document the customer signs to confirm that the work is finished. It is often needed to close out a job and to release final payment. Getting it signed at the final walkthrough, rather than chasing it later, shortens the time to get paid. Related: Work authorization, E-signature, Invoice
Change order
A written record that the scope, price or schedule of a job has changed after work began, ideally approved by the customer before the extra work is done. Change orders protect both the company and the customer from surprises. Unrecorded changes are a common reason reconstruction jobs lose money. Related: Scope of work, Supplement, Job budget
Claim number
The identifier the carrier assigns to a claim. It belongs on every document, invoice and email about that job. Missing or mistyped claim numbers are a simple, avoidable cause of delayed payments. Related: Carrier, Adjuster, Invoice
Deductible
The portion of a covered loss that the policyholder is responsible for paying under their insurance policy, according to the policy terms. Restoration companies usually collect it from the customer rather than the carrier. Explain how your company handles it early and in writing, and refer specific coverage questions to the customer's carrier or agent. Related: Policyholder, Carrier, AR aging
Estimate
A detailed document that describes the work to be done and its price, usually built from line items. On insurance work it is reviewed by the adjuster. A good estimate matches the scope, the photos and the documentation so that each line can be supported. Related: Line item, Scope of work, Estimator
Line item
A single entry on an estimate or invoice describing one task or material with its quantity and price. Line items should be supported by photos, readings or notes. Reviewing line items against documentation before sending an estimate helps avoid back-and-forth with the adjuster. Related: Estimate, Supplement, Invoice
Policyholder
The person or business that holds the insurance policy, usually the property owner and often the restoration company's direct customer. They sign the work authorization and decide many things about the job. Keeping them informed reduces anxious calls and builds referrals. Related: Work authorization, Deductible, Adjuster
Referral source
Where a job came from, such as a plumber, agent, property manager, carrier program, past customer or online search. Tracking it on every job shows which relationships actually bring in profitable work. It is one of the simplest fields to collect and one of the most useful for marketing decisions. Related: CRM, Program work, Gross margin
Scope of work
The description of exactly what work will be done on a job, in which areas, using which methods. It is the base for the estimate, the schedule and the job budget. A clear scope with photos and measurements is a strong defense against disputes later. Related: Estimate, Affected area, Change order
Supplement
A request to the carrier to add work or costs to an approved estimate, usually because hidden damage was found or conditions changed. Supplements need the same support as the original estimate: photos, readings and notes explaining what was found. Accurate, timely supplements reflect the real job, not a negotiating tactic. Related: Estimate, Change order, Adjuster
TPA
Short for third-party administrator, a company that manages claims or contractor networks on behalf of insurance carriers. TPAs often assign jobs, set documentation rules and review estimates. Working with a TPA usually means meeting their response and reporting expectations on every job. Related: Program work, Carrier, Referral source
Work authorization
The document a property owner or policyholder signs to allow the restoration company to begin work, often covering payment terms and who the company may communicate with. It should be signed before work starts, even on emergency calls. Having a version that can be signed on a phone helps crews collect it at 2 a.m. Related: E-signature, Policyholder, Certificate of completion

Money and job costing

How a restoration company tracks what a job earns, what it costs and when the cash actually arrives.

AR aging
A report that groups unpaid invoices by how long they have been outstanding, from current through long overdue. In restoration, insurance jobs can sit in AR for a long time. Reviewing AR aging weekly and assigning follow-ups keeps older balances from quietly becoming write-offs. Related: Invoice, Unbilled work, Retainage
Burden
The costs on top of an employee's wage that come with having them on the team, such as employer taxes, insurance, benefits and paid time off. Burden is part of what turns a wage into a loaded labor rate. Leaving it out makes jobs look more profitable than they are; your accountant can help you calculate it. Related: Loaded labor rate, Overhead, Job costing
Gross margin
Gross profit expressed as a share of revenue, showing how much of each sale is left after the direct costs of doing the work. It lets you compare jobs of different sizes and types fairly. Watching gross margin by job type and referral source shows which work is worth chasing. Related: Gross profit, Job costing, Overhead
Gross profit
Revenue from a job minus the direct costs of doing it, such as labor, materials, subcontractors and equipment. It is what is left to cover overhead and produce net profit. Gross profit only means something if direct costs are recorded completely and against the right job. Related: Gross margin, Job costing, Net profit
Invoice
The bill sent to the customer or carrier for completed work. In restoration, invoices often need to match an approved estimate and include supporting documentation. Sending invoices promptly after completion, with the claim number and paperwork attached, is one of the simplest ways to improve cash flow. Related: Estimate, AR aging, Certificate of completion
Job budget
The planned costs for a job, such as labor hours, materials, subcontractors and equipment, set when the job is sold or approved. Comparing actual costs to the budget while the job is running lets a project manager correct course before it is too late. A budget only reviewed after the job closes is a lesson, not a control. Related: Job costing, Change order, Gross profit
Job costing
Tracking all the direct costs of each job, including labor time, materials, subcontractors and equipment, so you can see what each job actually earned. It turns gut feel into evidence about which job types, customers and crews are profitable. The hardest part is usually getting accurate field time and material use recorded against the right job. Related: Gross profit, Job budget, Loaded labor rate
Loaded labor rate
What an hour of an employee's time actually costs the company: their wage plus burden such as taxes, insurance and benefits. Using the wage alone understates labor cost. Use the loaded rate in job costing and in any calculation of what admin time is worth. Related: Burden, Job costing, Overhead
Net profit
What the company keeps after all costs, including direct job costs and overhead. A company can have healthy gross profit on jobs and still have weak net profit if overhead is too high for its volume. Your accountant can help you read this on your financial statements. Related: Gross profit, Overhead, Gross margin
Overhead
The costs of running the business that are not tied to a specific job, such as rent, office staff, software, vehicles not charged to jobs, insurance and marketing. Overhead has to be covered by the gross profit from jobs. Knowing your overhead for a month tells you how much gross profit you need to break even. Related: Net profit, Gross profit, Burden
Retainage
A portion of a contract amount held back by the customer or general contractor until the job is finished and accepted. It is more common on commercial and large loss work. Track retainage separately so it does not get forgotten once the crew moves on. Related: Large loss, AR aging, Invoice
Revenue per technician
Total revenue over a period divided by the number of field technicians. It is a rough measure of how productive the field team is. Use it to spot trends in your own company over time rather than to compare against other businesses. Related: Utilization, Crew capacity, Field technician
Unbilled work
Work that has been done but not yet invoiced, such as completed jobs waiting on paperwork or running jobs that could be billed in stages. Unbilled work is cash the company has earned but cannot collect yet. A weekly review of completed-but-unbilled jobs often turns up easy wins. Related: WIP, Invoice, AR aging
WIP
Short for work in progress, the jobs that are open and underway but not finished. A WIP report shows each open job's budget, costs to date, billing to date and expected completion. Reviewing WIP regularly helps catch jobs that are going over budget or falling behind on billing. Related: Unbilled work, Job budget, Job costing

Equipment and supplies

The tools and materials that do the work in the field, and how to keep track of them.

Air mover
A high-velocity fan placed to move air across wet surfaces so moisture evaporates faster. Air movers are one of the most common pieces of drying equipment. Their number and placement should match the job's conditions and be recorded in the drying log. Related: Dehumidifier, Equipment placement, Structural drying
Air scrubber
A portable unit that filters airborne particles such as dust, soot and mold spores, often fitted with a HEPA filter. It can clean the air in a room or create negative pressure in a containment. Record where scrubbers ran and for how long, along with filter changes. Related: Negative air, Containment, Mold remediation
Antimicrobial
A product applied to surfaces to help control microbial growth such as mold or bacteria, common on water and sewage jobs. Use only products suitable for the intended use and follow the label directions exactly. Record which product was used, where, and when. Related: Mold remediation, Water categories, Consumables
Consumables
Materials used up on a job, such as plastic sheeting, tape, filters, antimicrobials, bags and protective gear. They are easy to forget when billing and costing. A simple habit of recording consumables per job keeps both invoices and job costing accurate. Related: Truck stock, Job costing, Line item
Dehumidifier
A machine that removes moisture from the air so wet materials can keep drying. Restoration dehumidifiers come in different types and sizes suited to different conditions. Readings at the unit's exhaust help show whether it is working well on a given job. Related: Air mover, Psychrometric readings, Structural drying
Equipment day
One piece of equipment running on one job for one day, a common unit for billing and tracking drying equipment. Equipment days need to be supported by the drying log and set and removal dates. Knowing where each unit is also prevents equipment from being lost on finished jobs. Related: Drying log, Air mover, Dehumidifier
Hygrometer
An instrument that measures relative humidity and temperature in the air, used to take psychrometric readings. Many restoration meters combine a hygrometer with other functions. Calibrate and check instruments as the manufacturer recommends so readings stay trustworthy. Related: Psychrometric readings, Moisture meter, Drying log
Moisture meter
A handheld tool that measures moisture in building materials, either with pins that penetrate the surface or with a non-penetrating sensor. Readings are used to map wet areas, set drying goals and confirm materials are dry. Use the same meter and method on the same materials each visit so readings compare cleanly. Related: Moisture map, Dry standard, Drying log
Negative air
Setting up air flow so a work area has lower air pressure than surrounding spaces, usually by exhausting filtered air out of a containment. This keeps dust, odor or spores from escaping into clean areas. Photograph the setup and note it in the job journal. Related: Containment, Air scrubber, Mold remediation
PPE
Short for personal protective equipment, such as gloves, eye protection, respirators and protective suits. The right PPE depends on the hazards of the job, especially on sewage, mold and fire work. Follow current safety guidance and manufacturer instructions, and involve a safety professional when you are unsure. Related: Water categories, Consumables, Mold remediation
Thermal camera
A camera that shows surface temperature differences as an image. Wet materials often appear cooler because of evaporation, which makes the camera useful for finding where to take moisture readings. It does not measure moisture itself, so always confirm with a moisture meter. Related: Moisture meter, Moisture map, Affected area
Truck stock
The tools, supplies and consumables kept on each vehicle so crews can start work without a trip to the shop. A standard truck stock list makes restocking predictable. Checking it on a set schedule prevents the 2 a.m. discovery that the plastic or filters ran out. Related: Consumables, Field technician, After-hours call

Software and technology

The software terms restoration teams run into when choosing and using tools to run the business.

Cloud software
Software that runs on the provider's servers and is used through a web browser or app, rather than installed on one office computer. It lets office and field staff see the same information from anywhere with a connection. Ask any provider how your data is backed up and how you can export it. Related: Mobile app, Job management software, Integration
CRM
Short for customer relationship management, software or a process for tracking contacts, leads, referral sources and communication. In restoration it often covers property managers, agents, plumbers and past customers as well as policyholders. Its value comes from consistent use, so keep required fields short. Related: Referral source, Job management software, Gmail integration
Custom reporting
Reports you can build or adjust to answer your own questions, such as jobs by referral source, open jobs by project manager or unbilled completed work. Standard reports cover common needs; custom reports cover the questions specific to your business. Decide which three or four reports you will actually review each week before building dozens. Related: WIP, AR aging, Job management software
E-signature
Signing a document electronically on a phone, tablet or computer instead of on paper. In restoration it is commonly used for work authorizations, change orders and certificates of completion. It lets crews collect signatures on site and keeps the signed copy with the job record. Related: Work authorization, Certificate of completion, Change order
Gmail integration
A connection between a business's Gmail email and another tool, such as job management software, so job-related email can be seen alongside the job. It reduces the need to search inboxes to find what was said to a customer or adjuster. Agree as a team on which emails belong on the job record. Related: Integration, CRM, Job journal
Integration
A connection that lets two software systems share data, such as job management software sending invoices to accounting software. Integrations cut double entry and the errors that come with it. Before connecting systems, decide which one is the source of truth for each kind of data. Related: QuickBooks sync, Gmail integration, Cloud software
Job management software
Software that keeps a restoration company's jobs in one place: customer and claim details, schedule, photos, notes, documents, time and costs. It replaces scattered spreadsheets, whiteboards, texts and paper files. The payoff depends on the team agreeing on what gets entered, by whom and when. Related: Work order, Photo stream, Job costing
Mobile app
A version of software built for phones and tablets so field staff can see jobs, take photos, record notes and time, and collect signatures on site. For restoration crews the mobile app is often where most documentation happens. Keep the steps crews must complete on every visit short and clear. Related: Field technician, Photo stream, E-signature
QuickBooks sync
Connecting job management software with QuickBooks accounting so customers, invoices or other financial records move between them without retyping. It reduces errors and keeps the office and the books in step. Set up matching customer and item naming first, and involve your bookkeeper or accountant in the setup. Related: Integration, Invoice, Job costing
Team messaging
Chat-style messaging inside a business tool so staff can talk about jobs without relying on personal texts. Messages tied to a job or team stay with the company record. It helps most when the team agrees that job decisions belong in the shared channel, not private texts. Related: Job journal, Dispatch, Mobile app
Time tracking
Recording the hours each person works and, ideally, which job and task they worked on. In restoration it feeds job costing and helps show where time goes. Clocking in and out against jobs from a phone is usually more accurate than reconstructing a timesheet at the end of the week. Related: Job costing, Loaded labor rate, Utilization
User permissions
Settings that control what each person can see and do in a software system, often grouped into roles such as office, field, manager and subcontractor. Setting permissions before go-live protects sensitive financial and customer data. Review them whenever someone changes roles or leaves. Related: Job management software, Subcontractor, Cloud software
Work order
A document or record that tells a crew or subcontractor what work to do on a job, where and when. It turns the scope of work into field instructions. Clear work orders reduce return trips and the calls back to the office asking what to do next. Related: Scope of work, Dispatch, Subcontractor

Definitions are general business explanations, not legal, insurance or safety advice. For standards that govern specific work, follow the current industry standard and your local requirements.

See RestoreUnited run a restoration company

Book a live walkthrough with our team, or choose a plan and get started.