Answer Hub · Restoration Equipment Management

How do you charge owned equipment to restoration jobs?

The short answer

Track every piece of owned equipment by unit and by day: when it was set on a job, when it was moved or removed, and why. Charge it to the job using a consistent internal day rate for job costing, bill customers or carriers according to the approved scope and agreed pricing, and back every equipment day with placement notes, readings and photos.

Why it matters

Dehumidifiers, air movers, air scrubbers and heaters are some of the most valuable assets a restoration company owns, and equipment days are a meaningful part of most mitigation invoices. Yet many shops cannot answer simple questions: how many days was each unit on this job, which units are on which jobs right now, and what does a piece of equipment cost us to own and run per day?

When equipment is tracked loosely, three things go wrong. Invoices miss equipment days that were legitimately used, or include days that cannot be supported. Job costing understates the true cost of drying jobs. And units sit forgotten in a basement after the job is dry, unavailable for the next loss.

Two separate numbers: cost and billing

It helps to keep two ideas apart.

  • Internal cost per equipment day. What it costs you to own and operate a unit for a day: purchase price spread over its useful life, maintenance, repairs, filters, cleaning, storage and transport. Your accountant can help you set a reasonable figure for each equipment type. This number is for job costing and profitability, not for the invoice.
  • Billable equipment days. What you charge the customer or carrier, based on the approved scope and your agreed pricing. The billable count has to be supported by documentation showing the equipment was placed, needed and monitored.

Mixing these up leads to bad decisions. A job can look profitable on the invoice and still lose money if equipment cost is never charged against it internally.

The method

1. Give every unit an ID

Label each piece of equipment with a short unique number. Record type, model and in-service date. This turns "three dehus" into "dehus 14, 22 and 31."

2. Log placement and removal on the job

When a tech sets equipment, they record which unit, which room and the date. When they move or pull it, they record that too. Placement photos showing the unit in the room make the log much stronger.

3. Tie equipment to readings

Each monitoring visit should include moisture readings and a note on whether equipment stays, moves or comes out. That is what justifies each day. Follow the current industry drying standard and your company's own procedures for when equipment can be removed.

4. Count equipment days the same way every time

Decide how you count partial days and whether the setup day and removal day both count, then apply it consistently. Put the rule in writing so the office and field agree.

5. Charge internal cost to the job

At job close, multiply each unit's equipment days by your internal cost per day for that equipment type and add it to job cost. Now your job profitability report reflects reality.

A hypothetical example

Say a basement water loss uses five units over four days.

UnitTypeSetRemovedEquipment daysSupported by
D14DehumidifierDay 1Day 44Placement photo, daily readings
D22DehumidifierDay 1Day 33Readings show area dry on day 3
A07Air moverDay 1Day 44Placement photo, daily readings
A11Air moverDay 1Day 44Placement photo, daily readings
A19Air moverDay 2Day 43Added after day 2 readings, noted in journal

That is 18 equipment days, each one traceable to a placement record and a reading. For internal costing, the office multiplies the dehumidifier days by the dehumidifier cost rate and the air mover days by the air mover rate. For billing, the same 18 days are presented with the supporting log.

Common mistakes

  • Counting by memory. If the equipment count comes from a tech's recollection on invoice day, it will be wrong in one direction or the other.
  • No removal record. Without a pull date, you cannot defend the day count, and the unit may never come back to the warehouse.
  • Billing days that are not supported. If the readings show an area was dry, leaving equipment running is hard to justify. Accuracy protects your credibility with carriers.
  • Ignoring internal cost. Drying jobs look more profitable than they are when equipment is treated as free.
  • No consistent day rule. If two PMs count setup day differently, your reports cannot be compared.

Keeping the fleet healthy

Equipment tracking also tells you when units need cleaning, filter changes or repair. Log maintenance against each unit ID. Units that are repeatedly down, or that never leave the warehouse, are worth reviewing before you buy more.

Setting up equipment tracking on Monday

  1. Label every unit in the warehouse with a short ID and list them in one place.
  2. Write your equipment-day counting rule on one page and share it with PMs and techs.
  3. Require a placement photo and unit IDs on every emergency service visit starting this week.
  4. Ask your accountant to help you set an internal cost per day for each equipment type.

How RestoreUnited helps

Today, RestoreUnited's Photos and Journals let techs record placement photos and notes on the job, Work Orders give each monitoring visit its own record, and Job Budgeting and Custom Reporting help you account for equipment cost in job profitability. Equipment Inventory, for tracking individual units across jobs, is coming soon.

See it in RestoreUnited: Job Budgeting

RestoreUnited product video

Frequently asked questions

Should the internal equipment cost match what we bill?

No. Internal cost reflects what owning and running the unit costs you and is used for job profitability. Billing follows the approved scope and agreed pricing. Keeping them separate shows your real margin on drying work.

How do we count the setup and removal days?

Pick a rule, write it down and apply it on every job. Consistency matters more than which rule you choose, and it makes your records easier for carriers and customers to follow.

Who should help set our internal cost per equipment day?

Your accountant. They can help you spread purchase cost over useful life and include maintenance, consumables and transport in a reasonable daily figure.

See RestoreUnited run a restoration company

Book a live walkthrough with our team, or choose a plan and get started.