Answer Hub · Employee Management

How do restoration companies track technician time by job?

The short answer

The most reliable way is to have technicians clock in and out against a specific job from their phones, with clear codes for drive time, shop time and on-site work. The office reviews entries daily, fixes gaps while memories are fresh, and compares hours against the job budget so overruns surface during the job instead of at invoicing.

Why job-level time matters

Labor is usually the biggest cost on a restoration job, and it is the easiest one to lose track of. When techs fill out a weekly timesheet from memory, hours drift toward whichever job feels biggest. A crew that spent Tuesday split between a water loss, a monitoring visit and a board-up will often write it down as one job.

That drift causes real problems. Job costs look wrong, so you cannot tell which kinds of work are profitable. Labor on the invoice may not match what was done. And when a customer or adjuster asks how many visits were made, the answer depends on who you ask.

Tracking time by job fixes this by recording hours at the moment they happen, tied to the work they belong to.

Set up the structure first

Before you pick a tool, decide what you want to know. Keep the list short.

  1. Job. Every entry belongs to a job, or to a clearly named non-job bucket such as shop, training or vehicle maintenance.
  2. Activity type. A small set of codes, for example: emergency response, mitigation, monitoring, demo, reconstruction, drive time, shop time.
  3. Who. Each tech clocks their own time. Crew leads should not batch-enter for the whole crew unless that is your deliberate policy.
  4. Notes. One line on what was done. This becomes useful when someone questions the hours later.

Resist adding many codes. Six to eight is plenty. More than that and techs pick whichever one is at the top of the list.

The daily routine

  • Clock in on arrival, out on departure. From the phone, against the job.
  • Switch jobs in the app, not in your head. When the crew leaves one site for another, clock out and in again.
  • Drive time gets its own code. Decide whether drive time is assigned to the destination job or tracked separately, and apply it the same way every time.
  • Office review every day. Someone checks the day's entries each morning for missing clock-outs, overlapping entries or hours on the wrong job.
  • Fix it within a day. A correction the next morning is easy. A correction two weeks later is a guess.

A worked example

Picture a two-person crew on a Wednesday. They start at the shop loading equipment, drive to a new water loss, spend the morning extracting and setting air movers, then stop at an existing job for a monitoring visit before returning.

EntryJobCodeHours (per tech)
Load trucksShopShop time0.5
Drive to new lossSmith water lossDrive time0.5
Extraction and setupSmith water lossMitigation4.0
Drive to existing jobLee basementDrive time0.5
Readings and adjustmentsLee basementMonitoring1.0
Return and unloadShopShop time1.0

On a paper timesheet this might read "Smith, 8 hours." With job-level entries, the Lee job shows the monitoring visit it actually received, the Smith job shows real mitigation hours, and shop time is visible as overhead rather than hidden inside a job.

Now compare against budget. If the Smith job was budgeted at 12 tech-hours for mitigation and the crew logged 8 on day one, the PM knows on Wednesday night that day two needs to be lighter, or that the scope grew and a conversation with the customer or carrier is coming.

Getting crews on board

Techs are more likely to clock time accurately when the process is quick and the reason is clear. A few practical moves help:

  • Show them the payoff. Accurate hours mean fewer calls from the office asking where they were on Tuesday, and fewer disputes about overtime.
  • Make it fast. Clocking in should take seconds from the job screen they already have open.
  • Train on a real day. Walk the crew through a full day of entries, including a job switch and drive time, rather than a slideshow.
  • Fix, do not punish. In the first month, treat missed entries as setup problems. Ask what got in the way and adjust codes or steps.
  • Share the results. When job-level hours help win a better schedule or show that a job type needs more labor, tell the crews.

Common mistakes

  • Weekly entry. It invites rounding and guessing. Daily is the minimum; real-time is better.
  • Too many codes. Techs stop reading them.
  • No review owner. If nobody is responsible for checking entries, errors pile up.
  • Treating time tracking as discipline. Explain why you track by job: accurate costs, fair invoices, better scheduling. Crews accept it more readily when they see the purpose.
  • Ignoring subs. Subcontractor hours usually come in on their invoices, but log their days on site against the job so your timeline is complete.

Whatever tool you use, have your accountant or employment attorney confirm how hours should be recorded for wage and overtime purposes in your state.

Using software to do it

A mobile clock-in tied to the job is the simplest way to get accurate entries. In RestoreUnited, Time Tracking lets field technicians record time against jobs from the mobile app, and Job Budgeting lets the office compare hours to the plan while the job is still open. Custom Reporting can then show labor by job type over time, which helps with pricing and crew planning.

See it in RestoreUnited: Time Tracking

RestoreUnited product video

Frequently asked questions

Should drive time be charged to the job?

That is a policy decision, and the important part is consistency. Many shops track drive time under its own code and decide later how to allocate it. Whatever you choose, apply it the same way on every job so your job costs are comparable.

What if a tech forgets to clock out?

The daily office review should catch it. The reviewer confirms the actual end time with the tech the next morning and corrects the entry with a short note explaining the change. Repeated misses are a coaching conversation, not a reason to drop job-level tracking.

How detailed should time notes be?

One short line is enough, such as extraction and air mover setup in the basement. The goal is that someone reading the job months later can tell what the hours were for without calling the tech.

See RestoreUnited run a restoration company

Book a live walkthrough with our team, or choose a plan and get started.