Answer Hub · Scheduling and Dispatch

What is the best way to dispatch restoration technicians from a mobile app?

The short answer

Dispatch from one shared schedule that both the office and the field see on their phones. Each assignment should carry the address, scope, loss type, access notes and arrival window, and techs should confirm, mark en route and close out from the app. Keep a single dispatcher accountable for changes, and handle after-hours calls with a written on-call rotation.

Why mobile dispatch matters in restoration

Restoration dispatch is not like routine service work. A burst supply line at 2 a.m., a roof tarp after a wind event and a third-day moisture check all compete for the same trucks. When dispatch lives in a whiteboard, a group text and someone's memory, the predictable failures show up: two techs drive to the same job, a monitoring visit gets skipped, or a crew arrives without the access code and burns an hour in the driveway.

A mobile dispatch workflow fixes this only if it changes how information moves. The goal is simple: everyone works from one schedule, every assignment carries what the tech needs to start work, and the office can see in real time what has actually happened in the field.

What every dispatched assignment should include

Before you worry about features, standardize the assignment itself. A tech opening the job on a phone should not have to call the office to begin.

  • Address and access: gate codes, lockbox location, which door, pets, whether the occupant will be home.
  • Loss type and category of work: water mitigation, board-up, mold containment, contents pack-out, reconstruction punch list.
  • Scope for this visit: "Initial inspection and extraction" is different from "day 3 readings, pull two dehus if dry."
  • Arrival window and who confirmed it with the customer.
  • Contact details for the homeowner, tenant, property manager or adjuster, and who is the decision maker.
  • Equipment expected on site so the tech knows what to check, move or pull.
  • Paperwork due: work authorization, photo set, moisture log, signature on completion.

The practical method

  1. One schedule, one owner. Pick a dispatcher for each shift. Others can request changes, but one person moves jobs. This prevents the silent double-booking that happens when three people edit the board.
  2. Schedule by visit, not by job. A water loss may need an inspection, extraction, two or three monitoring visits and an equipment pull. Put each on the calendar as its own assignment so nothing hides inside a job note.
  3. Require field status updates. Techs should acknowledge the assignment, mark en route, mark on site and mark complete from the app. Those four taps let the office answer "where is the crew?" without a phone call.
  4. Close out in the field. Photos, readings, notes and the customer signature should be captured before the tech leaves the driveway. "I'll write it up tonight" is how documentation gets lost.
  5. Route the day, then protect it. Group monitoring visits geographically in the morning and leave room in the afternoon for new losses. Emergencies will come; plan where they go.
  6. Write down the after-hours rotation. Who is on call, who backs them up, and how a new loss gets onto the schedule before morning.

A worked example

Picture a shop with three technicians on a Tuesday. Overnight, the on-call tech took a kitchen supply-line loss and did the extraction. By 7 a.m. the dispatcher has the following to place.

VisitTypeEst. time on siteAssigned
Kitchen loss, day 2 readingsMonitoring1 hourTech A
Basement loss, day 4, possible pullMonitoring + pickup1.5 hoursTech A
Crawlspace inspection, new callInspection2 hoursTech B
Mold containment setupProduction4 hoursTech B and C
Open slot for new lossesReserveAfternoonTech C

At 11:40 a call comes in for a second-floor bathroom overflow. Because Tech C's afternoon is held as reserve and Tech A has marked both monitoring visits complete, the dispatcher can see who is free and nearby, assign it from the office and send the access notes straight to the tech's phone. No round of phone calls is needed to figure out who is where.

Common mistakes

  • Dispatching by text message. Texts scatter details across threads and leave nothing on the job record.
  • Letting techs self-schedule monitoring visits. Well-meaning, but it hides workload from the dispatcher and makes it hard to reroute when an emergency lands.
  • No reserve capacity. A day booked solid at 7 a.m. forces you to bump a monitoring visit the moment a new loss calls.
  • Skipping status updates. If techs do not tap en route and complete, the schedule turns back into a guess by noon.
  • Treating the app as optional. If the office still calls techs for every detail, the field will keep ignoring the app. Put everything in the assignment and stop backfilling by phone.

How software can help

Any system you choose should let the office build and change the schedule, push assignments to a phone, collect field status and attach photos, notes and signatures to the job. RestoreUnited's Scheduling & Dispatch works alongside Job Management and Work Orders, with web and mobile apps for office staff and field technicians, so the dispatcher and the crew are looking at the same day. Team messaging through Messenger keeps quick questions tied to the people working the job rather than buried in personal texts.

Whatever tool you use, the habits above matter more than the screen. Standardize the assignment, give one person the board and insist that the field closes out in the app.

See it in RestoreUnited: Scheduling & Dispatch

RestoreUnited product video

Frequently asked questions

Should technicians be able to reschedule their own visits?

They should be able to request changes and flag problems, but one dispatcher should own the board. When everyone can move jobs, double-bookings and missed monitoring visits creep in. A clear request-and-approve habit keeps the schedule trustworthy.

How do we handle after-hours emergency calls with a mobile app?

Publish an on-call rotation with a primary and a backup. The on-call tech creates or receives the job, captures the work authorization and initial photos in the app, and the morning dispatcher picks up follow-up visits from the job record instead of from a voicemail.

What field status updates are worth requiring?

Acknowledged, en route, on site and complete cover most needs. They let the office answer customer questions about arrival times and see who is free when a new loss comes in, without calling the crew.

See RestoreUnited run a restoration company

Book a live walkthrough with our team, or choose a plan and get started.