Answer Hub · Field Documentation
How do you document pre-existing damage at a restoration job site?
The short answer
Document pre-existing damage before any work begins: walk the property with the customer, photograph each room in a consistent order with wide and close-up shots, note conditions unrelated to the loss in writing, and have the customer acknowledge the notes with a signature. Store everything on the job record with timestamps so it is easy to find later.
Why pre-existing damage documentation matters
Every restoration job site has conditions that were there before the loss: a cracked tile, a stained ceiling from an old leak, worn carpet, a scuffed wall, a sagging cabinet door, an old repair. When those conditions are not recorded up front, they can turn into disputes later. A homeowner may honestly believe your crew caused a scratch, or an adjuster may question whether certain damage is part of the claim.
Clear documentation protects everyone. It separates what the loss caused from what was already there, supports an accurate scope and keeps conversations with customers and carriers factual. The goal is accuracy and completeness, not building a case.
What counts as pre-existing damage
- Old water stains, mold or rot unrelated to the current loss
- Cracks in drywall, plaster, tile or foundation
- Worn, stained or damaged flooring
- Damaged trim, doors, cabinets or fixtures
- Prior repairs, patches or mismatched finishes
- Furniture and contents damage that predates the loss
- Exterior conditions such as damaged gutters, siding or roofing
- Access hazards like loose steps or railings
The practical method
- Document before work starts. Photograph and note conditions before moving furniture, extracting water or setting equipment, except where immediate safety or damage prevention requires action first. If emergency work has to come first, document as soon as practical and note the order.
- Walk the property with the customer when possible. Point out conditions you see and ask about known prior issues. Note their answers.
- Use a consistent photo order. Enter each room, take a wide shot from the doorway, then go clockwise around the room. Add close-ups of each condition with something for scale.
- Photograph adjacent unaffected areas. Hallways, stairs and rooms your crew will pass through can be damaged by equipment moves. Document their condition too.
- Write short, factual notes. "Hairline crack in hallway ceiling near light fixture, appears old, customer confirms present before loss." Avoid guessing at causes you cannot verify.
- Get acknowledgment. Have the customer review the notes and sign or initial them. A signature on a simple pre-existing conditions list prevents most later disagreements.
- Store everything on the job record. Photos and notes should be timestamped and attached to the job, not left on a tech's phone.
A worked example
Picture a water loss from a failed dishwasher. Before extraction, the tech does a 15-minute walkthrough with the homeowner.
| Location | Condition noted | Photos | Customer comment |
|---|---|---|---|
| Kitchen | Chipped corner on one floor tile near the fridge | Wide and close-up | Present for about a year |
| Kitchen | Cabinet door under sink does not close fully | Close-up | Known issue |
| Hallway | Scuffs on wall at the corner | Wide and close-up | Present before the loss |
| Living room | Carpet stain near the window | Close-up | Old pet stain |
| Basement stairs | Loose handrail | Close-up | Not previously noticed |
The tech reads the list back to the homeowner, who signs it on the tablet. When the reconstruction phase starts weeks later and the homeowner asks about the chipped tile, the PM pulls up the photo and the signed note in under a minute. The conversation stays friendly because the record is clear.
Handling conditions that need attention
Some pre-existing conditions are more than cosmetic. Loose railings, exposed wiring, old roof leaks or previous water damage may need to be reported to the customer as safety or scope concerns. Note them, tell the customer in plain language and, where they affect the claim, let the customer and carrier sort out coverage. If you see conditions that may involve hazardous materials, stop and involve the appropriate professional before disturbing them.
A simple standard for your crews
Write a one-page standard so every tech documents the same way: which rooms to photograph, the order, the minimum number of wide and close-up shots, how to word notes and when to get the customer's signature. Review a few job files each month against the standard and give quick feedback.
Common mistakes
- Starting work first. Once furniture is moved or materials removed, original conditions are hard to prove.
- Only photographing the affected room. Damage often happens along the equipment path.
- Notes that guess at cause. Describe what you see, not what you assume.
- No customer acknowledgment. Photos alone may not settle a disagreement; a signed list usually does.
- Photos left on personal phones. If they are not on the job record, they may as well not exist.
- Inconsistent habits between techs. A short standard checklist keeps every crew documenting the same way.
How RestoreUnited can help
RestoreUnited's Photos & Journals capture photos and notes directly on the job from the mobile app, so pre-existing conditions are timestamped and stored with the rest of the file. Electronic Signatures let the customer acknowledge the conditions list on site, and Job Management keeps it all in one place for the PM, the office and anyone who joins the job later.
See it in RestoreUnited: Photos & Journals
RestoreUnited product videoFrequently asked questions
When should pre-existing damage be documented?
Before any work begins, except where immediate action is needed for safety or to prevent further damage. In that case, document as soon as practical and note that emergency work came first.
Should the customer sign a pre-existing conditions list?
Yes, when possible. A short list reviewed with the customer and signed or initialed on site prevents most later disagreements and shows the conditions were discussed openly.
Do we need to document rooms that were not affected by the loss?
Document any area your crew will work in or pass through, including hallways, stairs and doorways used to move equipment. Those are common places for disputes about new damage.